Infiniti QX: SNOW mode switch - Instruments and controls - Infiniti QX Owner's ManualInfiniti QX: SNOW mode switch

For driving or starting the vehicle on snowy

For driving or starting the vehicle on snowy roads or slippery areas, push on the SNOW mode switch. The SNOW mode indicator light will illuminate. When the SNOW mode is activated, engine output is controlled to avoid wheel spin. Push off the SNOW mode for normal driving.

    Warning systems switch (if so equipped)
    The warning systems switch is used to turn on and off the warning systems (Forward Collision Warning (FCW), Lane Departure Warning (LDW) and Blind Spot Warning (BSW) systems) that are activa ...

    Tow mode switch
    TOW MODE should be used when pulling a heavy trailer or hauling a heavy load. Driving the vehicle in TOW MODE with no trailer/load or light trailer/light load will not cause any damage. Howe ...

    See also:

    Rear window and outside mirror defroster
    To defog/defrost the rear window glass and outside mirrors, start the engine and push the switch 1 on. The indicator light 2 will come on. Push the switch again to turn the defroster off. ...

    Car phone or CB radio
    When installing a car phone or a CB radio in your vehicle, be sure to observe the following cautions, otherwise the new equipment may adversely affect the electronic control modules and electr ...

    Making adjustments in 1 mph (Canada:1 km/h) increments
    ► Briefly press the cruise control lever to the pressure point, up 1 for a higher speed or down 2 for a lower speed. The last speed stored is increased or reduced. ...