Mercedes-Benz GL-Class: Floormat on the driver's side
WARNING 
Whenever you are using a floormat, make sure
there is enough clearance and that the
floormat is securely fastened.
The floormat should always be securely
fastened using the fastening equipment.
Before driving off, check that the floormat is
securely in place and adjust it if necessary. A
loose floormat could slip and hinder proper
functioning of the pedals.
Do not place several floormats on top of each
other as this may impair pedal movement.
► Slide the seat backwards.
► To install: place the floormat in the
footwell.
► Press studs 1 onto retainers 2.
► To remove: pull the floormat off
retainers 2.
► Remove the floormat.
Compass
Calling up the compass
► Press the
button on the
multifunction steering wheel repeatedly
until the Offroad menu appears in the
multifunction display.
The compass shows which direction t ...
Infrared reflective windshield
The infrared reflecting glass prevents the
vehicle interior from becoming too hot. It also
blocks radio waves up into the gigahertz
range.
In order to operate radio-controlled
equipment, e.g. t ...
See also:
Sand
This program should be used for terrain which is predominantly soft dry sand
or deep gravel.
Note: If the vehicle is unable to gain traction in extremely soft, dry sand,
switching DSC off may h ...
Flash-to-Pass
This feature is used to signal to the vehicle ahead that you want to pass.
If the headlamps are off or in the low-beam position, pull the turn signal lever
toward you to momentarily switch to high ...
Automatic transmission
1. To select Drive (D) when the vehicle is stationary, apply the foot brake and
press the gear selector release button.
Note: If pressure is applied to the selector lever before the foot brake is ...
