Cadillac Escalade: Passing Another Vehicle While Using Cruise Control
Use the accelerator pedal to increase the vehicle speed. When you take your foot off the pedal, the vehicle will slow down to the previous set cruise speed.
Reducing Speed While Using Cruise Control
If the cruise control system is already activated,
Press and hold the SET– button on the steering wheel until the desired
lower speed is reached, then release it.
To slow down in small amoun ...
Using Cruise Control on Hills
How well the cruise control works on hills depends on the vehicle speed, the
load, and the steepness of the hills. When going up steep hills, pressing the accelerator
pedal may be necessary to maint ...
See also:
Removing the vehicle battery
WARNING
Switch the ignition off before disconnecting battery terminals.
Always disconnect the negative terminal first and reconnect last.
Use caution when lifting the battery out of, or into, ...
System operation
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
► When the vehicle speed is above 4 MPH
(7 km/h).
► When the adjusting s ...
Remote Vehicle Start
With this feature the engine can be started from outside of the vehicle. ...
