Buick Enclave: Engine Oil Pressure Light - Warning Lights, Gauges, and Indicators - Instruments and Controls - Buick Enclave Owner's ManualBuick Enclave: Engine Oil Pressure Light

Do not keep driving if the oil pressure is low. The engine can become so hotWARNING
Do not keep driving if the oil pressure is low. The engine can become so hot that it catches fire.

Someone could be burned. Check the oil as soon as possible and have the vehicle serviced.

Notice: Lack of proper engine oil maintenance can damage the engine. The repairs would not be covered by the vehicle warranty.

Always follow the maintenance schedule for changing engine oil.

The oil pressure light should come on briefly as the engine is started.

The oil pressure light should come on briefly as the engine is started.

If it does not come on have the vehicle serviced by your dealer.

If the light comes on and stays on, it means that oil is not flowing through the engine properly. The vehicle could be low on oil and might have some other system problem.

    Tire Pressure Light
    For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the engine is started. It provides information about tire pressures and the TPMS When the Light Is On ...

    Security Light
    The security light should come on briefly as the engine is started. If the system is working normally, the indicator light turns off. If it does not come on, have the vehicle serviced by your dea ...

    See also:

    Rear Seats
    A. Seat Adjustment Handle B. Reclining Seatback Strap C. Sliding Seat Lever Entering and Exiting the Third Row WARNING Using the third row seating position while the second row is folded, or fo ...

    Rear-facing child restraint installation using LATCH
    Refer to all Warnings and Cautions in the “Child safety” and “Child restraints” sections before installing a child restraint. Follow these steps to install a rear-facing child restrain ...

    Switching on Blind Spot Assist
    ► Make sure that the radar sensor system and Blind Spot Assist are activated in the on-board computer. ► Turn the SmartKey to position 2 in the ignition lock. Warning lamps 1 light u ...