Buick Enclave: Security Light
The security light should come on briefly as the engine is started.
If the system is working normally, the indicator light turns off. If it does not come on, have the vehicle serviced by your dealer.
If the light stays on and the engine does not start, there could be a problem with the theft-deterrent system.
This light is also used to indicate the status of the anti-theft alarm system when the ignition is turned off.
The light will flash rapidly if the alarm system is arming and one or more of the monitored entry points is not closed. The light will stay on if the alarm is arming and all entry points are closed.
For information regarding this light and the vehicle's security system, see Anti-theft Alarm System .
Engine Oil Pressure Light
WARNING
Do not keep driving if the oil pressure is low. The engine can become so hot
that it catches fire.
Someone could be burned. Check the oil as soon as possible and have the vehicle
service ...
High-Beam On Light
The high-beam on light comes on when the high-beam headlamps are in use.
See Headlamp High/Low-Beam Changer for more information. ...
See also:
MB Info call button
► Open the stowage compartment under the
armrest.
► Press and hold MB Info call button 1
for
more than two seconds.
This initiates a call to the Mercedes-Benz
Customer Assistanc ...
Unlocking the driver's door(mechanical key)
If the vehicle can no longer be unlocked with
the SmartKey, use the mechanical key.
If you use the mechanical key to unlock and
open the driver's door, the anti-theft alarm
system will be trigge ...
HDC operation
With HDC engaged, the speed of descent can be altered using the cruise control
steering wheel switches, as follows:
• To increase speed press and hold the + switch (2) until the desired speed ...
