Infiniti QX: Locking with mechanical key
The power door lock system allows you to
lock or unlock all doors simultaneously
using the mechanical key.
► Turning the driver’s door key cylinder to
the front of the vehicle 1 will lock all
doors.
► Turning the driver’s door key cylinder
once to the rear of the vehicle 2 will
unlock the driver’s door. After returning
the key to the neutral position 3 ,
turning it to the rear again within 5
seconds will unlock all doors.
► You can switch the lock system to the
mode that allows you to open all the
doors when the key is turned once.
(See “How to use SETTING button” in
the “4. Monitor, climate, audio, phone
and voice recognition systems” section.)
Doors
WARNING
► Always have the doors locked while
driving. Along with the use of seat belts,
this provides greater safety in the event
of an accident by helping to prevent
persons from bei ...
Opening and closing windows with the mechanical key
The driver’s door key operation also allows
you to open and close all door windows.
To open the windows, turn the driver’s door
key cylinder to the rear of the vehicle for
longer than 1 se ...
See also:
Installing top tether strap (2nd row captain’s seats or 2nd row bench seat)
2nd row bench seat
First, secure the child restraint with the
LATCH lower anchors (2nd row captain’s or
bench outboard seating positions only) or
the seat belt, as applicable.
1. If ...
General information
WARNING
All categories of messages contain important information which should be taken
note of and,
where a malfunction is indicated, addressed as soon as possible at an authorized
M ...
Using the system
Initialization
When the ignition switch is pushed to the
ON position, INFINITI Voice Recognition is
initialized, which may take up to one
minute. When completed, the system is
ready to accept ...
