Infiniti QX: Opening and closing windows with the mechanical key - Doors - Pre-driving checks and adjustments - Infiniti QX Owner's ManualInfiniti QX: Opening and closing windows with the mechanical key

Infiniti QX / Infiniti QX Owner's Manual / Pre-driving checks and adjustments / Doors / Opening and closing windows with the mechanical key

The driver’s door key operation also allows you to open and close all door windows. To open the windows, turn the driver’s door key cylinder to the rear of the vehicle for longer than 1 second. The door is unlocked and the window keeps opening while turning the key. This function can also be performed by pushing and holding the door UNLOCK button of the Intelligent Key. (See “Remote keyless entry system” later in this section.). To close the windows, turn the driver’s door key cylinder to the front of the vehicle for longer than 1 second. The door is locked and the window keeps closing while turning the key.

    Locking with mechanical key
    The power door lock system allows you to lock or unlock all doors simultaneously using the mechanical key. ► Turning the driver’s door key cylinder to the front of the vehicle 1 will ...

    Locking with inside lock knob
    To lock the door individually, move the inside lock knob to the lock position 1 . To unlock, move the inside lock knob to the unlock position 2 . Be sure not to leave the Intelligent Key in ...

    See also:

    Switching on Blind Spot Assist
    ► Make sure that the radar sensor system and Blind Spot Assist are activated in the on-board computer. ► Turn the SmartKey to position 2 in the ignition lock. Warning lamps 1 light u ...

    Using ACC
    1. SET+: Press to increase or set the speed. 2. Press to resume the set speed. 3. Press to decrease the set speed. 4. CAN: Cancels, but retains the set speed in memory. 5. Press to decrease the ...

    Ride Control System Messages
    SERVICE STABILITRAK If your vehicle has StabiliTrak and this message displays, it means there may be a problem with the StabiliTrak system. If you see this message, try to reset the system. Stop; t ...