Mercedes-Benz GL-Class: Loading the vehicle
- Instruction labels for tires and loads
- Maximum permissible gross vehicleweight rating
- Number of seats
- Determining the correct load limit
- Vehicle identification p
- Trailer load/noseweight
Restarting the tire pressure monitor
WARNING
It is the driver's responsibility to set the tire
pressure to the recommended cold tire
pressure. Underinflated tires affect the ability
to steer or brake the vehicle. You migh ...
Instruction labels for tires and loads
WARNING
Do not overload the tires by exceeding the
specified load limit as indicated on the Tire
and Loading Information placard on the
driver's door B-pillar. Overloading the tires
c ...
See also:
Xenon headlamp bulb replacement
1. Twist and lift off the domed cap.
2. Rotate the collar securing the bulb to the lamp and release the bulb.
3. Pull off the electrical connector and remove the bulb unit.
4. Insert the new bulb ...
Tool kit
Note: Tool types and positions may vary from the illustrations.
The tool kit is located under a panel set in the loadspace floor.
Note: Take careful note of the stowage position for each tool, as ...
Engine block heater (if so equipped)
Engine block heaters are used to assist in
cold temperature starting.
The engine block heater should be used
when the outside temperature is 208F
(−78C) or lower.
To use the engine bloc ...






