Range Rover: License plate lamp bulb replacement - Maintenance - Range Rover Owner's ManualRange Rover: License plate lamp bulb replacement

Range Rover / Range Rover Owner's Manual / Maintenance / License plate lamp bulb replacement

1. Using a small flat-bladed screwdriver, carefully prize the lamp from the tailgate.

1. Using a small flat-bladed screwdriver, carefully prize the lamp from the tailgate.

2. Twist the bulb holder counter-clockwise to unlock then pull to remove. Pull out the bulb to remove.

    Side repeater lamp bulb replacement
    Follow the steps illustrated. Insert a new bulb and refit the components. ...

    Interior lamp bulb replacement
    Follow the steps illustrated. Insert a new bulb and refit the components. 1. Footwell, puddle and loadspace lamps. 2. Courtesy lamp and map lamps. 3. Vanity mirror lamps. 4. Rear courtesy lamps. ...

    See also:

    New Vehicle Break-In
    Notice: The vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: Keep the vehicle speed at 88 km/h (55 mph) or less for the firs ...

    Tips and Troubleshooting
    IR Sensor Inoperative: Check that the batteries are good in the remote control. Check that the remote Control IR Sensor is not blocked. Aim the remote control toward the IR Sensor being controlled. ...

    Lap Belt
    This part is only for the lap belt. To learn how to wear a lap-shoulder belt, see Lap-Shoulder Belt  . The vehicle may have a center seating position. When you sit in the center front seating ...