Range Rover: Interior lamp bulb replacement
Follow the steps illustrated. Insert a new bulb and refit the components.
1. Footwell, puddle and loadspace lamps.
2. Courtesy lamp and map lamps.
3. Vanity mirror lamps.
4. Rear courtesy lamps.
License plate lamp bulb replacement
1. Using a small flat-bladed screwdriver, carefully prize the lamp from the tailgate.
2. Twist the bulb holder counter-clockwise to unlock then pull to remove. Pull
out the bulb to remove. ...
Window reset
The windows will need to be reset if the battery is disconnected, becomes discharged
or power supply is interrupted.
Reset as follows:
1. Close the window fully.
2. Release the switch, then lift ...
See also:
Tire Pressure
Tires need the correct amount of air pressure to operate effectively.
Notice: Neither tire underinflation nor overinflation is good.
Underinflated tires, or tires that do not have enough air, can re ...
Dot matrix liquid crystal display
The dot matrix liquid crystal display
appears in the vehicle information display
1 located between the speedometer and
odometer, and shows the indicators for the
driving systems, Intelligent ...
Taillamps, Turn Signal, Sidemarker, and Stoplamps
A. Taillamp
B. Sidemarker Lamp
To replace one of these bulbs:
1. Open the liftgate. See Liftgate .
2. Remove the black cuff from the lamp assembly by pulling rearward from the top
to unfasten ...
