Cadillac Escalade: Guidelines - Rear Vision Camera (RVC) - Object Detection Systems - Driving and Operating - Cadillac Escalade Owner's ManualCadillac Escalade: Guidelines

The RVC system has a guideline overlay that can help the driver align the vehicle when backing into a parking spot.

To turn the guidelines on or off:

1. Make sure that URPA has not been disabled.

2. Shift into P (Park).

3. Press the CONFIG hard key to enter the configure menu options, then press the CONFIG hard key to select Display or touch the Display screen button.

4. Select the Rear Camera Options screen button. The Rear Camera Options screen displays.

5. Touch the Guidelines screen button. The screen button will be highlighted when on.

    Symbols
    The navigation system may have a feature that allows for viewing parking assist symbols on the navigation screen while using the RVC. The Ultrasonic Rear Park Assist (URPA) system must not be disabl ...

    RVC Location
    The camera is located above the license plate. This shows the field of view that the camera provides. A. View displayed by the camera A. View displayed by the camera B. Corners of the rear b ...

    See also:

    If a Crash Occurs
    If there has been an injury, call emergency services for help. Do not leave the scene of a crash until all matters have been taken care of. Move the vehicle only if its position puts you in danger, ...

    Information about driving abroad
    Converting to symmetrical low beam when driving abroad: switch the headlamps to symmetrical low beam in countries in which traffic drives on the opposite side of the road to the country where the ...

    Reducing Speed While Using Cruise Control
    If the cruise control system is already activated, Press and hold the SET– button on the steering wheel until the desired lower speed is reached, then release it. To slow down in small amoun ...