Range Rover: Crawl mode (locked access height) - Air suspension - Range Rover Owner's ManualRange Rover: Crawl mode (locked access height)

When the vehicle is at Normal height and traveling less than 22 mph (35 km/h), or at Access height, press down on the raise/lower switch for longer than 3 seconds to lock the vehicle at access height. The system lock indicator (5) will illuminate and SUSPENSION LOCKED AT ACCESS HEIGHT will be displayed in the message center.

The vehicle may then be driven slowly at access height, to assist with manoeuvring in confined areas (e.g. multi-storey car parks). To cancel crawl mode, press up on the raise/lower switch for longer than 1 second. The system lock indicator will extinguish and if the vehicle is traveling faster than 6 mph (10 km/h) it will return to normal height.

Crawl mode will be cancelled automatically if the vehicle speed exceeds 24 mph (40 km/h).

    Selecting access height
    To select access height from normal height, press down on the raise/lower switch. To select access height from Off-road height, press down on the switch once, and then a second time while lowering ...

    Remote operation
    WARNING The Smart Key can be operated from inside or outside the vehicle. It is therefore important that it is kept out of the reach of children at all times. WARNING When operating the ...

    See also:

    Checking Brake Fluid
    Check brake fluid by looking at the brake fluid reservoir. See Engine Compartment Overview  . The fluid level should be above MIN. If it is not, have the brake hydraulic system checked to se ...

    Tow mode
    The TOW MODE should be used when pulling a heavy trailer or hauling a heavy load. Driving the vehicle in the TOW MODE with no trailer/load or light trailer/light load will not cause any dama ...

    What Will You See after an Airbag Inflates?
    After the frontal airbags and seat-mounted side impact airbags inflate, they quickly deflate, so quickly that some people may not even realize an airbag inflated. Roof-rail airbags may still be at ...