Cadillac Escalade: Sheet Metal Damage
If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection.
Original manufacturer replacement parts will provide the corrosion protection while maintaining the vehicle warranty.
Underbody Maintenance
Use plain water to flush dirt and debris from the vehicle's underbody. Your dealer
or an underbody car washing system can do this. If not removed, rust and corrosion
can develop. ...
Finish Damage
Quickly repair minor chips and scratches with touch-up materials available from
your dealer to avoid corrosion. Larger areas of finish damage can be corrected in
your dealer's body and paint sho ...
See also:
Securing Child Restraints (Rear Seat Position)
When securing a child restraint in a rear seating position, study the instructions
that came with the child restraint to make sure it is compatible with this vehicle.
If the child restraint has the ...
Tire pressure of at least 180 kPa(1.8 bar/26 psi) is not reached
If, after five minutes, a pressure of 180 kPa
(1.8 bar/26 psi) has not been achieved:
► Press the on/off switch on the tire
inflation
compressor to 0.
The tire inflation compressor is ...
Hitch Cover (without Dual Exhaust)
The vehicle may have a hitch cover. To remove the hitch cover:
1. Turn the fasteners on the lower tabs 90 degrees counterclockwise.
2. Lift the lower edge of the cover about 45 degrees.
3. Pull t ...