How to Reset the Engine Oil Life System

Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change. Always reset the engine oil life to 100% after every oil change. It will not reset it ...

When to Check and Change Automatic Transmission Fluid

It is usually not necessary to check the transmission fluid level. The only reason for fluid loss is a transmission leak or overheating the transmission. If a small leak is suspected, then use the f ...

See also:

OnStar Additional Information
Transferring Service Push to request account transfer eligibility information. The Advisor can assist in canceling or removing account information. If OnStar receives information that vehicle owne ...

When the System Does Not Seem To Work Properly
The RVC system might not work properly or display a clear image if: The RVC is turned off. See “Turning the RVC System On or Off” earlier in this section. It is dark. The sun or the beam ...

Reprograming a single garage door opener button
To program a device to a previously programed button: 1. Press and hold the desired pre-programed garage door opener button for at least 20 seconds, but no longer than 30 seconds, until the indicat ...