Cadillac Escalade: Consistency of Readings - Automatic Transmission Fluid - Vehicle Checks - Vehicle Care - Cadillac Escalade Owner's ManualCadillac Escalade: Consistency of Readings

Always check the fluid level at least twice using the procedures described. Consistency (repeatable readings) is important to maintaining proper fluid level. If fluid is added, it may take 15 minutes or longer to obtain an accurate reading because of residual fluid draining down the dipstick tube. If inconsistent readings persist, check the transmission breather to be sure it is clean and not clogged. If readings are still inconsistent, contact your dealer.

    How to Check Automatic Transmission Fluid
    Notice: Too much or too little fluid can damage the transmission. Too much can mean that some of the fluid could come out and fall on hot engine parts or exhaust system parts, starting a fire. Too l ...

    Engine Air Cleaner/Filter
    See Engine Compartment Overview   for the location of the engine air cleaner/filter. Inspect the air cleaner/filter at the scheduled maintenance intervals and replace it at the first oil ...

    See also:

    Flash-to-Pass
    This feature is used to signal to the vehicle ahead that you want to pass. If the headlamps are off or in the low-beam position, pull the turn signal lever toward you to momentarily switch to high ...

    General program (special programs off)
    This program is compatible with all on and off-road conditions. If not already active, it should be selected before driving on surfaces which are similar to a hard road surface. Dry cobbles, tar ...

    Operating tips
    When the engine coolant temperature and outside air temperature are low, the air flow from the foot outlets may not operate. However, this is not a malfunction. After the coolant temperature w ...