Cadillac Escalade: Video Screen(s)
The video screen(s) are located in the overhead console.
To use the video screen(s):
1. Push the release button located on the overhead console.
2. Move the screen to the desired position.
When the video screen is not in use, push it up into its locked position.
If a DVD is playing and the screen is raised to its locked position, the screen remains on. This is normal, and the DVD continues to play through the previous audio source. Use the remote control power button or eject the disc to turn off the screen.
The overhead console contains the infrared transmitters for the wireless headphones and the infrared receivers for the remote control. They are located at the rear of the console.
Notice: Avoid directly touching the video screen, as damage may occur. See “Cleaning the Video Screens” later in this section for more information.
Audio Output
Audio from the DVD player or auxiliary inputs can be heard through the following
possible sources:
Wireless headphones
Vehicle speakers
Vehicle-wired headphone jacks on the RSA system, if the ...
Remote Control
To use the remote control, aim it at the transmitter window at the rear of the
RSE overhead console and press the desired button. Direct sunlight or very bright
light could affect the ability of t ...
See also:
Problems with the seat ventilation
If one or all of the indicator lamps in the seat
ventilation button are flashing, the seat
ventilation has switched off automatically.
The vehicle's electrical system voltage is too
low because ...
Using Softkeys to Control a USB Storage Device or iPod
The five softkeys below the radio display are used to control the functions listed
below.
To use the softkeys:
1. Press the first or fifth softkey below the radio display to display the functions ...
Cleaning
If your windshield is not clear after using
the windshield washer or if a wiper blade
chatters when running, wax or other
material may be on the blade or windshield.
Clean the outside of the w ...
