Infiniti QX: Variable voltage control system - Maintenance and do-it-yourself - Infiniti QX Owner's ManualInfiniti QX: Variable voltage control system

CAUTION
► Do not ground accessories directly to the battery terminal. Doing so will bypass the variable voltage control system and the vehicle battery may not charge completely.
► Use electrical accessories with the engine running to avoid discharging the vehicle battery.

The variable voltage control system measures the amount of electrical discharge from the battery and controls voltage generated by the generator.

    Battery
    ► Keep the battery surface clean and dry. Clean the battery with a solution of baking soda and water. ► Make certain the terminal connections are clean and securely tightened. &# ...

    Drive belts
    1. Power steering fluid pump 2. Water pump 3. Alternator 4. Crankshaft pulley 5. Air conditioner compressor WARNING Be sure the ignition switch is in the OFF or LOCK position before se ...

    See also:

    Maximum load limits
    Maximum trailer loads Never allow the total trailer load to exceed the value specified in the “Towing load/ specification” later in this section. The total trailer load equals trailer weigh ...

    Tread wear
    The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified U.S. government course. For example, a tire graded 150 would ...

    Rear lamp - bulb replacement
    Note: The direction indicator lamp, stop lamp, and tail lamp are LED units, and cannot be serviced. 1. Rear fog lamp. 2. Reversing lamp 3. Twist the relevant bulb unit and pull to access the bu ...