Infiniti QX: Drive belts - Maintenance and do-it-yourself - Infiniti QX Owner's ManualInfiniti QX: Drive belts

1. Power steering fluid pump

1. Power steering fluid pump
2. Water pump
3. Alternator
4. Crankshaft pulley
5. Air conditioner compressor

Be sure the ignition switch is in the OFF or WARNING
Be sure the ignition switch is in the OFF or LOCK position before servicing drive belts. The engine could rotate unexpectedly.

1. Visually inspect each belt for signs of unusual wear, cuts, fraying or looseness. If the belt is in poor condition or loose, have it replaced or adjusted by an INFINITI retailer. 2. Have the belts checked regularly for condition and tension in accordance with the maintenance schedule in your “INFINITI Service and Maintenance Guide”.

    Variable voltage control system
    CAUTION ► Do not ground accessories directly to the battery terminal. Doing so will bypass the variable voltage control system and the vehicle battery may not charge completely. &# ...

    Spark plugs
    WARNING Be sure the engine and the ignition switch are off and that the parking brake is engaged securely. CAUTION Be sure to use the correct socket to remove the spark plugs. An incorre ...

    See also:

    Cruise control lever
    1 To store the current speed or a higher speed 2 To store the current speed or a lower speed 3 To deactivate DISTRONIC 4 To store the current speed or to call up the last stored speed ...

    Range
    This shows the predicted distance (miles or kilometers) that the vehicle should travel on the remaining fuel, assuming fuel consumption stays constant. ...

    Most common factors contributing to vehicle corrosion
    ► The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas. ► Damage to paint and other protective coatings caused by gravel and sto ...