Cadillac Escalade: Traction – AA, A, B, C - Uniform Tire Quality Grading - Wheels and Tires - Vehicle Care - Cadillac Escalade Owner's ManualCadillac Escalade: Traction – AA, A, B, C

The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. Warning: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.

    Treadwear
    The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wea ...

    Temperature – A, B, C
    The temperature grades are A (the highest), B, and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a ...

    See also:

    Setting DSR
    With the DSR speed function, you can set the speed of DSR (the speed for driving downhill) to a value between 3 mph (Canada: 4 km/h) and 10 mph (Canada: 18 km/h). The adjustments are made in 1-mp ...

    StabiliTrak® OFF Light
    This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator light then goes off. Press and re ...

    Setting the specified minimum distance
    You can set the specified minimum distance for DISTRONIC by varying the time span between one and two seconds. This time span determines the distance that DISTRONIC should maintain from the vehicl ...