Infiniti QX: Auto closure
If the lift gate is pulled down to a partly open position, the lift gate will pull itself to the closed position. Do not apply excessive force when the auto closure is operating. Excessive force applied may cause the mechanism to malfunction.
CAUTION
► The lift gate will automatically close
from a partly open position. To avoid
pinching, keep hands and fingers away
from lift gate opening.
► Do not let children operate the lift gate.
Operating power lift gate
To operate the power lift gate, the selector
lever must be in the P (Park) position.
The power lift gate will not operate if the
battery voltage is low.
Power lift gate main switch
The power ...
Lift gate release lever
If the lift gate cannot be opened with the
door lock switch due to a discharged
battery, follow these steps.
1. Remove the cover A inside of the lift
gate using a suitable tool.
2. Move th ...
See also:
Seat belt care
The belt should be replaced if webbing becomes frayed, contaminated or damaged.
It is essential to replace the entire assembly after it has been worn in a severe
impact even if damage to the assem ...
Clearing the programmed information
Individual buttons cannot be cleared,
however to clear all programming, push
and hold the two outside buttons and
release when the indicator light begins to
flash (in approximately 20 seconds) ...
Steep slopes
If the vehicle is stationary on a steep, slippery slope, it may begin to slide
even with the brakes applied. This is because without wheel rotation, the ABS cannot
determine vehicle movement.
To ...
