If the manufacturer of your child restraint requires the use of a top tether strap, it must be secured to an anchor point.

WARNING

► In the 3rd row bench seat, a child restraint with a top tether strap can only be used in the center position. Do not place in an outboard seating position and attempt to angle the tether strap to the center position.
► Child restraint anchor points are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts or harnesses.
► Do not allow cargo to contact the top tether strap when it is attached to the top tether anchor. Properly secure the cargo so it does not contact the top tether strap. Cargo that is not properly secured or cargo that contacts the top tether strap may damage the top tether strap during a collision. Your child could be seriously injured or killed in a collision if the child restraint top tether strap is damaged.

Top tether anchor point locations

Anchor points are located in the following locations:
► 2nd row bench seat (if so equipped) on the floor behind the outboard seating positions as shown.
► 2nd row captain’s seats (if so equipped) on the floor behind the seats as shown.
► 3rd row bench seat on the floor of the cargo area behind the center seat position as shown. If you have any questions when installing a top tether strap child restraint on the rear seat, consult an INFINITI retailer for details.