Cadillac Escalade: Tire Changing - Wheels and Tires - Vehicle Care - Cadillac Escalade Owner's ManualCadillac Escalade: Tire Changing

Storing the Tire Sealant and Compressor Kit
The tire sealant and compressor kit is located under the storage tray on the driver side trim panel (over the rear wheelhouse). To access the tire sealant and compressor kit: 1. Remove the tray b ...

Removing the Spare Tire and Tools
The equipment needed to change a flat tire is stored under the storage tray, located on the driver side trim panel, over the rear wheelhouse. Regular Wheelbase Shown, Extended Wheelbase Similar. ...

See also:

To erase all programing
For first time programing, ensure that the engine is switched off: 1. Ensure that the ignition is on (but with the engine switched off). 2. Press and hold the two outer buttons on the transceiver in ...

Cleaning after off-road driving
NOTICE Ensure that the areas around air intakes and the front grille are clean and clear of debris. Pay particular attention to the lower grille and radiator. Failure to do so may cause the ...

Cleaning the seat belts
► Use clean, lukewarm water and soap solution. Do not clean the seat belts using chemical cleaning agents. Do not dry the seat belts by warming them above 176 °F (80 °C) or placing them ...