Cadillac Escalade: Storing the Tire Sealant and Compressor Kit
The tire sealant and compressor kit is located under the storage tray on the driver side trim panel (over the rear wheelhouse).
To access the tire sealant and compressor kit:
1. Remove the tray by pulling up on the finger depression to access the tire sealant and compressor kit.
2. Locate the tire sealant and compressor kit.
3. Remove the sealant and compressor kit by pulling the velcro strip up and back.
4. Remove the sealant and compressor kit from its plastic tray assembly.
To store the tire sealant and compressor kit, reverse the steps.
Removal and Installation of the Sealant Canister
To remove the sealant canister: 1. Unlock the air only hose (F) from the tire sealant canister (B) by pulling up on the lever. 2. Pull the air only hose (F) from the tire sealant canister (B). 3 ...Tire Changing
...See also:
Safety Belt Care
Keep belts clean and dry.
WARNING
Do not bleach or dye safety belts. It may severely weaken them. In a crash, they
might not be able to provide adequate protection. Clean safety belts only with ...
Tires
Display messages
USA only:
The yellow tire pressure
monitor warning lamp
(pressure loss/
malfunction) is lit.
Possible causes/consequences and ►
Solutions
Risk of accident
The tire ...
Radiator
Vehicles with a diesel engine: do not
cover the radiator, for example with a
winter front or bug cover. Otherwise, the
readings of the on-board-diagnostic
system may be inaccurate. Some of these
...