Mercedes-Benz GL-Class: System self-test
The 42 indicator lamp illuminates when you:
• turn the SmartKey to position 1 or 2 in the
ignition lock
• on vehicles with KEYLESS-GO, press the
Start/Stop button once or twice
The indicator lamp goes out
again after approximately six seconds.
If the indicator lamp does not
illuminate or is lit continuously, the system is
malfunctioning. Have the BabySmart™
system checked at an authorized Mercedes-
Benz Center before transporting a child on
the front-passenger seat.
For further information, see "Problems with air bag deactivation system".
WARNING
Do not place powered-on laptops, mobile
phones, electronic tags such as those used in
skipasses or similar electronic devices on the
front passenger seat. Signals from such
devices may interfere with the BabySmart™
air bag deactivation system. Such signal
interference may cause the
indicator lamp not to come on during self-test.
The + SRS indicator lamp and/or the
indicator lamp could be
continuously lit, indicating that the system is
not functioning. The front-passenger front air
bag could deploy inadvertently or fail to
deploy in an accident.
How the air bag deactivation systemworks
The BabySmart™ system is standard
equipment in Canada.
WARNING
Accident statistics show that children
secured in the rear seats are safer than
children secured in the front-passenge ...
Problems with air bag deactivation system
WARNING
If the indicator lamp
illuminates and remains illuminated when the weight of a
typical adult or someone larger than a small individual has been detected on the
passenger s ...
See also:
Off-road ESP®
An ESP® system specifically suited to off-road
terrain is activated automatically if the offroad
drive program is activatedor if the LOW RANGE off-road gear is selected. It
intervenes with a delay ...
Transmission
Electronic Range Select (ERS) Mode
ERS mode allows you to choose the top-gear limit of the transmission and the
vehicle's speed while driving downhill or towing a trailer.
The vehicle has an e ...
Activating/deactivating the MONOfunction
The MONO function is only available with
automatic climate control.18
You can use the MONO function to adopt the
settings configured for temperature, air
distribution and airflow on the driver's s ...