Mercedes-Benz GL-Class: Switching the seat heating on/off
Adjusting the four-way lumbarsupport
You can adjust the contour of the driver's seat
backrests individually to provide optimum
support for your back.
1 To raise the backrest contour
2 To soften the backrest contour
3 To lower the ...
Switching on/off
The three red indicator lamps in the button
indicate the heating level you have selected.
If the battery voltage is too low, the seat
heating may switch off.
One or more of the indicator lamp ...
See also:
Switching off the engine
Before stopping the engine, ensure that the vehicle is parked safely with the
parking brake applied and P selected.
Press and release the engine START/STOP button to stop the engine. The audio,
t ...
Exiting the Feature Settings Menu
The feature settings menu will be exited when any of the following occurs:
The vehicle is no longer in ON/RUN.
The trip/fuel or vehicle information DIC buttons are pressed.
The end of the feat ...
SBZA Detection Zones
The SBZA sensor covers a zone of approximately one lane over from both sides
of the vehicle, 3.5m (11 ft). This zone starts at each side mirror and goes back
approximately 5.0m(16 ft). The height ...






