Mercedes-Benz GL-Class: Storing the current speed or calling upthe last stored speed - Cruise control - Driving systems - Driving and parking - Mercedes-Benz GL-Class Owner's ManualMercedes-Benz GL-Class: Storing the current speed or calling upthe last stored speed

WARNING The set speed stored in memory should only 
The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from returning to the preset speed could cause an accident and/or serious injury to you and others.

Briefly pull the cruise control lever towards you 4.
Remove your foot from the accelerator pedal.

The first time cruise control is activated, it stores the current speed or regulates the speed of the vehicle to the previously stored speed.

    Storing and maintaining the currentspeed
    You can store the current speed if you are driving faster than 20 mph (30 km/h). ► Accelerate the vehicle to the desired speed. ► Briefly press the cruise control lever up 1 or down ...

    Setting a speed
    WARNING   Keep in mind that it may take a brief moment until the vehicle has made the necessary adjustments. Increase or decrease the set vehicle speed to a value that the prevailing ro ...

    See also:

    Towing a vehicle with both axles onthe ground
    When having your vehicle towed, observe the important safety notes. WARNING   The power assistance for the steering and the brake force booster do not work when the engine is not runnin ...

    2nd row seats
    WARNING ► Never allow anyone to ride in the cargo area or on the rear seat when it is in the fold-down position. Use of these areas by passengers without proper restraints could resul ...

    Belt warning for the driver and frontpassenger
    Regardless of whether the driver and front passenger have fastened their seat belts already, the seat belt warning lamp lights up for 6 seconds after every engine start. It then goes out if the d ...