Infiniti QX: Setting memory function
The status of the following settings can be linked to the Intelligent Key and the memorized settings can be available for each Intelligent Key.
► Air conditioner system
► Navigation system
► Audio system
To use the memory function, lock the doors with the Intelligent Key that is linked to the settings. To enable the memorized settings: 1. Carry the Intelligent Key that is linked to the settings, and unlock the doors by pushing the driver’s door handle request switch or “UNLOCK” button on the Intelligent Key. 2. Push the ignition switch to the “ON” position. “Connection with the key has been done” will be displayed on the screen and the memorized settings are available (only when a new Intelligent Key is used).
Memory storage
Two positions for the driver’s seat, steering
column and outside mirrors can be stored
in the automatic drive positioner memory.
Follow these procedures to use the memory
system.
1. Move t ...
System operation
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
► When the vehicle speed is above 4 MPH
(7 km/h).
► When the adjusting s ...
See also:
Important safety notes
WARNING
When operating the climate control, the air
that enters the passenger compartment
through the air vents can be very hot or very
cold (depending on the set temperature). This
c ...
Towing your vehicle
When towing your vehicle, all State (Provincial
in Canada) and local regulations for
towing must be followed. Incorrect towing
equipment could damage your vehicle.
Towing instructions are avai ...
Cancel route guidance
To stop route guidance, proceed as follows:
1. Touch Nav menu on the map menu screen.
2. Touch the Cancel guidance soft key. ...
