Infiniti QX: System operation
The automatic drive positioner system will not work or will stop operating under the following conditions:
► When the vehicle speed is above 4 MPH
(7 km/h).
► When the adjusting switch for the
driver’s seat and steering column is
turned on while the automatic drive
positioner is operating.
► When the memory switch 1 or 2 is not
pushed for at least 1 second.
► When the seat, steering column and
outside mirrors have already been
moved to the memorized position.
► When no position is stored in the
memory switch.
► When the engine is started while
moving the automatic drive positioner.
► When the AT selector lever is moved
from the P (Park) position to any other
position. (However, it will not be
canceled if the switch is pushed while
the seat and steering column are
returning to the previous positions
(entry/exit function).).
► When the driver’s door remains open
for more than 45 seconds and the
ignition switch is not in the ON position.
Setting memory function
The status of the following settings can be linked to the Intelligent Key and the memorized settings can be available for each Intelligent Key. ► Air conditioner system► Navigation ...See also:
Video media player controls
WARNING
Do not adjust the touch screen controls, or allow the system to distract the
driver, while the vehicle is moving. Driver distraction can lead to accidents, causing
serious injury o ...
Adaptive cruise control overview
The Adaptive Cruise Control (ACC) system is designed to aid the driver to maintain
a gap from the vehicle ahead or a set road speed if there is no slower vehicle ahead.
WARNING
ACC is not a s ...
Cargo floor box
Push the handle to open the cargo floor
board 1 . ...