Cadillac Escalade: Setting Cruise Control - Cruise Control - Cruise Control - Driving and Operating - Cadillac Escalade Owner's ManualCadillac Escalade: Setting Cruise Control

If the cruise button is on when not in use, it could get bumped and go into cruise when not desired. Keep the cruise control switch off when cruise is not being used.

The cruise control light on the instrument panel cluster comes on after the cruise control has been set to the desired speed.

1. Press the 2. Get up to the desired speed. button.
2. Get up to the desired speed.
3. Press the SET− button located on the steering wheel and release it.
4. Take your foot off the accelerator.

    Cruise Control
    WARNING Cruise control can be dangerous where you cannot drive safely at a steady speed. So, do not use the cruise control on winding roads or in heavy traffic. Cruise control can be dangerous ...

    Resuming a Set Speed
    If the cruise control is set at a desired speed and then the brakes are applied, the cruise control is disengaged without erasing the set speed from memory. Once the vehicle speed reaches about 40 k ...

    See also:

    System self-test
    After you have switched on the ignition, the system carries out a self-diagnosis. WARNING   A malfunction in the system has been detected if one of the following conditions occurs: • ...

    Vehicles without extended Off-Road Proengineering package
    Basic setting The extent to which the vehicle is raised or lowered depends on the basic setting selected. Select: • Raised level, for driving on normal off-road terrain • Highway/high-s ...

    Cleaning the rear view camera
    ► Use clear water and a soft cloth to clean camera lens 1. Do not clean the camera lens and the area around the rear view camera with a power washer. ...