Infiniti QX: Seat belt maintenance
► To clean the seat belt webbing, apply a
mild soap solution or any solution
recommended for cleaning upholstery
or carpets. Then, wipe with a cloth and
allow the seat belts to dry in the shade.
Do not allow the seat belts to retract
until they are completely dry.
► If dirt builds up in the shoulder belt
guide of the seat belt anchors, the seat belts may retract slowly. Wipe the
shoulder belt guide with a clean, dry
cloth.
► Periodically check to see that the seat
belt and the metal components such as
buckles, tongues, retractors, flexible
wires and anchors work properly. If
loose parts, deterioration, cuts or other
damage on the webbing is found, the
entire seat belt assembly should be
replaced.
Seat belt extenders
If, because of body size or driving position,
it is not possible to properly fit the lapshoulder
belt and fasten it, an extender
that is compatible with the installed seat
belts is available t ...
Child safety
WARNING
Do not allow children to play with the seat
belts. Most seating positions are equipped
with Automatic Locking Retractor (ALR)
mode seat belts. If the seat belt becomes
wrapped aroun ...
See also:
Jump starting
To start your engine with a booster battery,
the instructions and precautions below
must be followed.
WARNING
► If done incorrectly, jump starting can
lead to a battery explosion, resu ...
Automatic Transmission
The automatic transmission has a shift lever located on the console between the
seats.
► (Park): This position locks the front wheels. It is the best position to use when
starting the eng ...
4WD shift indicator
The 4WD shift indicator is displayed in the
vehicle information display.
The indicator should turn off within 1
second after placing the ignition switch in
the ON position.
While the engin ...
