Infiniti QX: How to use STATUS button
To display the status of the audio, air conditioner system, fuel consumption and navigation system, push the STATUS button. The following information will appear when the STATUS button is pushed repeatedly. Audio and Air conditioner system - Audio and Navigation system - Audio and fuel economy - Audio and Air conditioner system
How to use brightness control and display ON/OFF button
HOW TO USE BRIGHTNESS CONTROL
AND DISPLAY ON/OFF BUTTON
Push the button to switch the
display brightness to the daytime mode or
the nighttime mode, and to adjust the
display brightness usin ...
See also:
System maintenance
► The two radar sensor units 1 for the
BSW and Blind Spot InterventionTM
systems are located near the rear
bumper. Always keep the area near
the radar sensors clean. Do not attach
st ...
Checking Brake Fluid
Check brake fluid by looking at the brake fluid reservoir. See Engine Compartment
Overview .
The fluid level should be above MIN. If it is not, have the brake hydraulic system
checked to se ...
Lowering the vehicle
► Place the ratchet wrench onto the
hexagon
nut of the jack so that the letters AB are
visible.
► Turn the ratchet wrench until the vehicle
is
once again standing firmly on the gro ...







