Infiniti QX: How to adjust the screen view
To adjust the Display ON/OFF, Brightness, Tint, Color, Contrast and Black Level of the Around View Monitor, push the SETTING button with the Around View Monitor on, select the item key and adjust the level using the INFINITI controller. Do not adjust the Brightness, Tint, Color, Contrast and Black Level of the Around View Monitor while the vehicle is moving. Make sure the parking brake is firmly applied.
Camera aiding corner sonar function
When the corner of the vehicle moves
closer to the object while the Around View
Monitor is displayed, an indicator is
displayed and a tone is sounded by the
corner sonar function to warn the d ...
Around ViewTM Monitor settings
To set up the Around View Monitor to your
preferred settings, push the SETTING button,
select the “Other” key and then select
the “Camera” key.
Predictive Course Lines:
When this ite ...
See also:
Transmission
Electronic Range Select (ERS) Mode
ERS mode allows you to choose the top-gear limit of the transmission and the
vehicle's speed while driving downhill or towing a trailer.
The vehicle has an e ...
Reprograming a single garage door opener button
To program a device to a previously programed button:
1. Press and hold the desired pre-programed garage door opener button for at
least 20 seconds, but no longer than 30 seconds, until the indicat ...
Stability control warning lamps
The DSC warning lamp in the instrument pack illuminates briefly when the ignition
is turned on.
If the warning lamp flashes rapidly during driving, the system is active.
A fault with the DSC sys ...






