Infiniti QX: Around ViewTM Monitor settings
To set up the Around View Monitor to your preferred settings, push the SETTING button, select the “Other” key and then select the “Camera” key.
Predictive Course Lines:
When this item is turned to ON, the predictive course lines is displayed in the front and the rearview.
Camera View Priority:
The view shown on the screen at the beginning of around view monitor operation can be selected in order of priority.
Non-viewable Area Reminder:
With this item turned to ON, the nonviewable area is highlighted in yellow for 7 seconds after the bird-eye view is displayed.
Sonar Beep:
When this item is turned to ON, you will hear a tone sound when the corner sonar indicator appears.
Sonar Display:
When this item is turned to ON, the corner sonar indicator is displayed in the frontside view.
Corner Sonar Sensitivity:
Adjust the sensitivity level of the corner sonar higher (right) or lower (left).
How to adjust the screen view
To adjust the Display ON/OFF, Brightness,
Tint, Color, Contrast and Black Level of the
Around View Monitor, push the SETTING
button with the Around View Monitor on,
select the item key and adj ...
Operating tips
► The screen displayed on the Around
View Monitor will automatically return
to the previous screen 3 minutes after
the CAMERA button has been pushed
while the selector lever is in a posi ...
See also:
Activating/deactivating climatecontrol
Important information
WARNING
When the climate control system is
deactivated, the outside air supply and
circulation are also deactivated. Only choose
this setting for a short time. O ...
Display
Press CONFIG to enter the configure menu options, then press CONFIG repeatedly
until Display is selected or press the Display screen button.
Display OFF
Press this screen button to turn the displ ...
Audio operation precautions
Radio
Push the ignition switch to the ACC or ON
position and push the radio band select
button to turn on the radio. If you listen to
the radio with the engine not running, the
ignition switc ...
