Range Rover: Garage door transceiver
CAUTION
Do not use the transceiver with any garage door opener that lacks the safety stop and reverse feature as required by safety standards.
CAUTION
When programing the transceiver to a garage door opener or entry gate, ensure the area is clear. This will prevent potential harm or damage as the gate or garage door will activate during the program.
NOTICE
This device may suffer from interference if operated in the vicinity of a mobile or fixed station transmitter. This interference is likely to affect the hand-held transmitter as well as the in-car transceiver.
The door transceiver is located in the rear-view mirror. It can be programed to transmit the radio frequencies of up to three different transmitters, which can be used to operate garage doors, entry gates, home lighting, security systems or other radio frequency operated devices.
Although this section mainly describes the procedures for a garage door opener, it equally applies to the previously mentioned applications.
In some countries, this feature is also known as the HomeLink® Universal Transceiver. The transceiver radio frequency approval numbers for the USA and Canada are shown below:
USA and Puerto Rico - FCC: K8597R315. Canada - CAN: 2145 101 790A.
Note: HomeLink® is a registered trademark owned by the Johnson Controls, Inc. Milwaukee, Wisconsin.
For further information, see 54, INFORMATION AND ASSISTANCE.
Before programing
NOTICE When programing a device that may require you to press and re-press the hand-held transmitter (cycle), unplug the device during the cycling process to prevent possible motor failure. ...See also:
Armrest (if so equipped)
Front seats
Front seats
The console box lid can be used as an
armrest.
Slide the box lid forward or backward to
the desired position (if so equipped).
2nd row seat
2nd row seat
Pu ...
Tips and Troubleshooting
IR Sensor Inoperative: Check that the batteries are good in the remote control.
Check that the remote Control IR Sensor is not blocked. Aim the remote control toward
the IR Sensor being controlled. ...
Topping up the brake fluid
NOTICE
Brake fluid will damage painted surfaces. Soak up any spillage with an absorbent
cloth immediately and wash the area with a mixture of car shampoo and water.
Only use new fluid from an ...