Cadillac Escalade: Front Wiper Blade Replacement - Wiper Blade Replacement - Vehicle Checks - Vehicle Care - Cadillac Escalade Owner's ManualCadillac Escalade: Front Wiper Blade Replacement

1. Pull the windshield wiper arm connector away from the windshield.

2. Squeeze the grooved areas on each side of the blade, and turn the blade assembly

2. Squeeze the grooved areas on each side of the blade, and turn the blade assembly away from the arm connector.

3. Install the new blade onto the arm connector and make sure the grooved areas

3. Install the new blade onto the arm connector and make sure the grooved areas are fully set in the locked position.

For the proper type and size, see Maintenance Replacement Parts  .

    Wiper Blade Replacement
    Windshield wiper blades should be inspected for wear or cracking. See Maintenance Schedule  . Replacement blades come in different types and are removed in different ways. ...

    Rear Wiper Blade Replacement
    1. Lift the wiper blade assembly up and out of the park rest position. 2. Pull the wiper blade assembly away from the backglass. The backglass wiper blade will not lock in a vertical position, so ...

    See also:

    What to Use
    Refer to Recommended Fluids and Lubricants   to determine what kind of lubricant to use. ...

    If a Tire Goes Flat
    It is unusual for a tire to blow out while driving, especially if the tires are maintained properly. See Tires  . If air goes out of a tire, it is much more likely to leak out slowly. But if th ...

    Transmission
    Electronic Range Select (ERS) Mode ERS mode allows you to choose the top-gear limit of the transmission and the vehicle's speed while driving downhill or towing a trailer. The vehicle has an e ...