Mercedes-Benz GL-Class: Folding the rear bench seat back - Enlarging the cargo compartment - Stowage areas - Stowing and features - Mercedes-Benz GL-Class Owner's ManualMercedes-Benz GL-Class: Folding the rear bench seat back

► Pull release catch 3 upwards.

► Pull release catch 3 upwards.
► Fold backrest 2 backwards until it engages, making sure not to trap the seat belts while doing so.
► Fold seat cushion 1 backwards and push until you hear it engage.
► Pull up and adjust the head restraints if necessary.

    Folding the rear bench seat forwards
    If the driver's or front-passenger seat is set for a larger person, it may not be possible to fold the rear bench seat forwards. In this case, move the front seats as far forward as possible. ...

    See also:

    Satellite radio reception
    Satellite radio can significantly increase the number of radio channels available. Where satellite signal strength is adversely affected by terrain, ground transmitters are used to relay the signal ...

    Charging System Light
    The charging system light comes on briefly when the ignition is turned on, but the engine is not running, as a check to show the light is working. It should go out when the engine is started. If ...

    Transmission
    Driver Shift Control (DSC) The DSC switch is located on the shift lever. To enable the DSC feature: 1. Move the column shift lever to the M(Manual) position. The Driver Information Center (DIC) ...