Cadillac Escalade: Engine Overheating - Vehicle Checks - Vehicle Care - Cadillac Escalade Owner's ManualCadillac Escalade: Engine Overheating

The vehicle has several indicators to warn of engine overheating.

There is a coolant temperature gauge on your vehicle's instrument panel. See Engine Coolant Temperature Gauge  .

In addition, ENGINE OVERHEATED STOP ENGINE, ENGINE OVERHEATED IDLE ENGINE, and a ENGINE POWER IS REDUCED message comes on in the Driver Information Center (DIC) on the instrument panel. See Engine Cooling System Messages   and Engine Power Messages  .

If the decision is made not to lift the hood when this warning appears, but instead get service help right away. See Roadside Service (U.S. and Canada)   or Roadside Service (Mexico)  .

If the decision is made to lift the hood, make sure the vehicle is parked on a level surface.

Then check to see if the engine cooling fans are running. If the engine is overheating, both fans should be running. If they are not, do not continue to run the engine and have the vehicle serviced.

Notice: Engine damage from running the engine without coolant is not covered by the vehicle warranty. See Overheated Engine Protection Operating Mode   for information on driving to a safe place in an emergency.

Notice: If the engine catches fire while driving with no coolant, the vehicle can be badly damaged. The costly repairs would not be covered by the vehicle warranty. See Overheated Engine Protection Operating Mode   for information on driving to a safe place in an emergency.

How to Add Coolant to the Surge Tank
WARNING You can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough. Do not spill coolant on a hot engine. ...

If Steam Is Coming from the Engine Compartment
WARNING Steam from an overheated engine can burn you badly, even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. Turn it off and get everyone away ...

See also:

Grade Braking
The Grade Braking shift modes can be activated by pressing the button on the end of the shift control lever. While in Range Selection Mode, Grade Braking is deactivated allowing the driver to select ...

Returning the Third Row Seat from a Tumbled Position
To return the seat to the normal seating position: 1. Open the liftgate to access the controls for the seat. 2. Make sure there is nothing that could become trapped under the seat. 3. Release the s ...

Windows
POWER WINDOWS WARNING ► Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to pr ...