Range Rover: Remote key fob battery replacement
Note: There are two designs of Smart Key, refer to the information which is relevant to the design of Smart Key supplied with the vehicle.
When the battery needs renewing, there will be a significant decrease in the effective range and the message SMART KEY BATTERY LOW will be displayed in the message center.
To renew the battery:
1. Press and hold the release button.
2. Open the side cover.
3. Remove the battery drawer and remove the battery.
4. Fit a new CR2032 type battery (available from your Land Rover Retailer/Authorized
Repairer), with the positive (+) side upwards.
When the battery needs renewing, there will be a significant decrease in the effective range and the message SMART KEY BATTERY LOW will be displayed in the message center.
To renew the battery:
1. Slide the cover in the direction of the arrow until a click is heard. Remove
the cover.
2. Use the emergency key blade to separate the Smart key body.
3. Fit a new CR2032 type battery (available from your Land Rover Retailer/Authorized
Repairer), with the positive (+) side upwards.
Note: Avoid touching the new battery, as moisture/oil from fingers can reduce battery life and corrode the contacts.
Refit the parts in reverse order, ensuring that they click securely into place.
Battery disposal: Used batteries must be disposed of correctly, as they contain harmful substances. Seek advice on disposal from your Land Rover Retailer/Authorized Repairer and/or your local authority.
Tailgate opening height
It is possible to set the maximum height to which a powered tailgate will open. This is useful in parking areas with very low roofs or just for ease of use. 1. Open the tailgate to the position whi ...See also:
Removing the vehicle battery
WARNING
Switch the ignition off before disconnecting battery terminals.
Always disconnect the negative terminal first and reconnect last.
Use caution when lifting the battery out of, or into, ...
CD Player
Playing a CD
Insert a CD partway into the slot, label side up. The player pulls it in and
the CD should begin playing.
EJECT: Press and release to eject
the disc that is currently playing. A be ...
Maximum load rating
WARNING
Do not overload the tires by exceeding the
specified load limit as indicated on the Tire
and Loading Information placard on the
driver's door B-pillar. Overloading the tires
c ...