Buick Enclave: Engine Cover
A. Oil Fill Cap
B. Engine Cover
To remove:
1. Remove the oil fill cap (A).
2. Raise the engine cover (B) to release it from the retainers.
3. Lift and remove the engine cover.
4. Reverse Steps 1 through 3 to reinstall engine cover.
Engine Compartment Overview
A. Radiator Pressure Cap. See Cooling System .
B. Engine Coolant Recovery Cap. See Cooling System .
C. Remote Negative (−) Terminal.
See Jump Starting .
D. Engine Compartment Fuse Block .
...
Engine Oil
To ensure proper engine performance and long life, careful attention must be
paid to engine oil. Following these simple, but important steps will help protect
your investment:
► Always use ...
See also:
Cargo Cover
For vehicles with a cargo cover, it can be used to cover items in the rear of
the vehicle. To install the cover, place the loops on each corner of the cover on
the four hooks in the rear of the ve ...
Before programing
NOTICE
When programing a device that may require you to press and re-press the hand-held
transmitter (cycle), unplug the device during the cycling process to prevent possible
motor failure.
...
Setting the side air vents
► To open/close: turn thumbwheel 3 to the
left or right.
Side window defroster vent 1 is never
completely shut, even if side air vent 2 is
shut. ...
