Buick Enclave: Doing Your Own Service Work - Vehicle Checks - Vehicle Care - Buick Enclave Owner's ManualBuick Enclave: Doing Your Own Service Work

You can be injured and the vehicle could be damaged if you try to do serviceWARNING
You can be injured and the vehicle could be damaged if you try to do service work on a vehicle without knowing enough about it.

► Be sure you have sufficient knowledge, experience, the proper replacement parts, and tools before attempting any vehicle maintenance task.

► Be sure to use the proper nuts, bolts, and other fasteners. Metric and English fasteners can be easily confused. If the wrong fasteners are used, parts can later break or fall off.

You could be hurt.

If doing some of your own service work, use the proper service manual. It tells you much more about how to service the vehicle than this manual can. To order the proper service manual, see Service Publications Ordering Information .

This vehicle has an airbag system.

Before attempting to do your own service work, see Servicing the Airbag-Equipped Vehicle .

Keep a record with all parts receipts and list the mileage and the date of any service work performed.

See Maintenance Records .

    Hood
    To open the hood: 1. Pull the hood release handle with this symbol on it. It is located under the instrument panel on the driver side of the vehicle. 2. At the front of the vehicle, pull up on ...

    See also:

    Deactivating DISTRONIC
    There are several ways to deactivate DISTRONIC: ► Briefly press the cruise control lever forwards 1. or ► Brake. The last speed stored remains stored until you switch off the ...

    Cargo net
    Important safety notes WARNING   Make sure the cargo net is properly engaged at top and bottom position and the tightening belts are securely fastened. Never use a damaged cargo net. A ...

    Floormat on the driver's side
    WARNING   Whenever you are using a floormat, make sure there is enough clearance and that the floormat is securely fastened. The floormat should always be securely fastened using the fa ...