Mercedes-Benz GL-Class: Daytime running lamps
Daytime running lamps in Canada
The "daytime running lamps" function is required by law in Canada. It cannot therefore be deactivated.
► Turn the light switch to
.
With the engine running: depending on the ambient light, the daytime running lamps or the low-beam headlamps are switched on.
When the low-beam headlamps are
activated, the 
indicator lamp on
the
light switch and the 
indicator lamp
in
the instrument cluster light up.
When the engine is running and the vehicle is stationary or if the parking brake is applied: if you move the selector lever from a drive position to P, the daytime running lamps/ low-beam headlamps go out after three minutes.
When the engine is running, the vehicle is
stationary and in high ambient light
brightness: if you turn the light switch
to 
, the daytime running lamps and
the
parking lamps are switched on.
Daytime running lamps in the USA
In the USA, the daytime running lamps are deactivated upon delivery from the factory.
► To activate the daytime running lamps: activate the daytime running lamps function in the on-board computer.
► Turn the light switch to
.
With the engine running: depending on the ambient light, the daytime running lamps or the low-beam headlamps are switched on.
When the low-beam headlamps are
activated, the 
indicator lamp on
the
light switch and the 
indicator lamp
in
the instrument cluster light up.
If the engine is running and you turn the light
switch to or
, the manual settings
take precedence over the daytime running
lamps.
Low-beam headlamps
► To switch on the low-beam headlamps:
turn the SmartKey in the ignition lock to
position 2 or start the engine.
► Turn the light switch to
.
The indicator lamp in the
instru ...
Automatic headlamp mode
► To switch on automatic headlamp
mode: turn the light switch to .
SmartKey in position 1 in the ignition lock:
the parking lamps are switched on or off
automatically depending on the br ...
See also:
Tire and Loading Information Label
Label Example
A vehicle specific Tire and Loading Information label is attached to the center
pillar (B-pillar). With the driver door open, you will find the label attached below
the door lock po ...
Playing a CD (In Either the DVD or CD Slot)
Insert a CD partway into the slot, label side up. The player pulls it in and
the CD should begin playing. (Loading a disc into the system, depending on media
type and format, ranges from five to 2 ...
Courtesy Transportation Program (U.S. and Canada)
To enhance your ownership experience, we and our participating dealers are proud
to offer Courtesy Transportation, a customer support program for vehicles with the
Bumper-to-Bumper (Base Warranty ...
