Mercedes-Benz GL-Class: Automatic headlamp mode
► To switch on automatic headlamp
mode: turn the light switch to
.
SmartKey in position 1 in the ignition lock:
the parking lamps are switched on or off automatically depending on the brightness of the ambient light.
With the engine running: depending on the brightness of the ambient light, the daytime running lamps10 or the low-beam headlamps are switched on or off automatically.
When the low-beam headlamps are
switched on, the
indicator lamp in
the
instrument cluster lights up.
WARNING
If the light switch is set to
,
the low-beam
headlamps will not come on automatically if
it is foggy. This could endanger you and
others. Therefore, turn the light switch to
in fog.
The automatic headlamp feature is only an
aid. The driver is responsible for the vehicle's
lighting at all times.
WARNING
In low ambient lighting or foggy conditions,
only switch from position
to
with
the vehicle at a standstill in a safe location.
Switching from
to
will briefly
switch off the headlamps. Doing so while
driving in low ambient lighting conditions may
result in an accident.
Daytime running lamps
Daytime running lamps in Canada
The "daytime running lamps" function is
required by law in Canada. It cannot therefore
be deactivated.
► Turn the light switch to
.
With the e ...
Front fog lamps and rear fog lamp
Front fog lamps
Only vehicles with front fog lamps have the
"fog lamps" function.
WARNING
If you suspect that driving conditions will be
foggy, turn the light switch to
b ...
See also:
Rear media control from the touch screen
When the main rear media control screen is displayed on the touch screen, the
rear media remote control will be locked out. No part of the rear media system will
operate until it is turned on via ...
Tips and Troubleshooting
IR Sensor Inoperative: Check that the batteries are good in the remote control.
Check that the remote Control IR Sensor is not blocked. Aim the remote control toward
the IR Sensor being controlled. ...
Engaging the differential locks
Pull away slowly when the differential
locks are activated.
Function or performance tests may only be
performed on a 2-axle dynamometer. If you
wish to operate the vehicle on such a
dynamomet ...






