Infiniti QX: Car phone or CB radio
When installing a car phone or a CB radio in your vehicle, be sure to observe the following cautions, otherwise the new equipment may adversely affect the electronic control modules and electronic control system harness.
WARNING
► A cellular phone should not be used for
any purpose while driving so full attention
may be given to vehicle operation.
Some jurisdictions prohibit the use of
cellular phones while driving.
► If you must make a call while your
vehicle is in motion, the hands-free
cellular phone operational mode (if so
equipped) is highly recommended. Exercise
extreme caution at all times so full
attention may be given to vehicle operation.
► If a conversation in a moving vehicle
requires you to take notes, pull off the
road to a safe location and stop your
vehicle before doing so.
CAUTION
► Keep the antenna as far away as
possible from the electronic control
modules.
► Keep the antenna wire more than 8 in
(20 cm) away from the electronic control
system harness. Do not route the antenna
wire next to any harness.
► Adjust the antenna standing-wave ratio
as recommended by the manufacturer.
► Connect the ground wire from the CB
radio chassis to the body.
► For details, consult an INFINITI retailer.
Care and maintenance
Use a lightly dampened, lint free cloth to
clean the surfaces of your Dual Head
Restraint DVD System (DVD player face,
screen, remote controller, etc.).
CAUTION
► Do not use any solve ...
Bluetooth® Hands-Free Phone System
WARNING
► Use a phone after stopping your vehicle
in a safe location. If you have to use a
phone while driving, exercise extreme
caution at all times so full attention may
be given to ...
See also:
Driving in Mud, Sand, Snow, or Ice
Use a low gear when driving in mud – the deeper the mud, the lower the gear.
Keep the vehicle moving to avoid getting stuck.
Traction changes when driving on sand. On loose sand, such as on beache ...
Connecting multiple devices
NOTICE
Do not plug non-audio devices into the USB port.
You can connect multiple devices simultaneously to the portable media interface
and switch between them using the touch screen. Select ...
Reprograming a single garage door opener button
To program a device to a previously programed button:
1. Press and hold the desired pre-programed garage door opener button for at
least 20 seconds, but no longer than 30 seconds, until the indicat ...






