Buick Enclave: Brake Assist - Brakes - Driving and Operating - Buick Enclave Owner's ManualBuick Enclave: Brake Assist

This vehicle has a brake assist feature designed to assist the driver in stopping or decreasing vehicle speed in emergency driving conditions. This feature uses the stability system hydraulic brake control module to supplement the power brake system under conditions where the driver has quickly and forcefully applied the brake pedal in an attempt to quickly stop or slow down the vehicle.

The stability system hydraulic brake control module increases brake pressure at each corner of the vehicle until the ABS activates.

Minor brake pedal pulsation or pedal movement during this time is normal and the driver should continue to apply the brake pedal as the driving situation dictates.

The brake assist feature will automatically disengage when the brake pedal is released or brake pedal pressure is quickly decreased.

    Parking Brake
    To set the parking brake, hold the regular brake pedal down, then push the parking brake pedal down. If the ignition is on, the brake system warning light will come on. See Brake System Warning ...

    Hill Start Assist (HSA)
    This vehicle has a Hill Start Assist (HSA) feature, which may be useful when the vehicle is stopped on a grade. This feature is designed to prevent the vehicle from rolling, either forward or rear ...

    See also:

    Collision Damage Repair (U.S. and Canada)
    If the vehicle is involved in a collision and it is damaged, have the damage repaired by a qualified technician using the proper equipment and quality replacement parts. Poorly performed collision ...

    Troubleshooting guide
    ...

    Air Vents
    Use the air outlets located in the center and on the side of the instrument panel to direct the airflow. Operation Tips Keep the hood and front air inlets free of ice, snow, or any other obstruc ...