Buick Enclave: Parking Brake
To set the parking brake, hold the regular brake pedal down, then push the parking brake pedal down.
If the ignition is on, the brake system warning light will come on.
See Brake System Warning Light .
Notice: Driving with the parking brake on can overheat the brake system and cause premature wear or damage to brake system parts. Make sure that the parking brake is fully released and the brake warning light is off before driving.
To release the parking brake, hold the regular brake pedal down, then push down momentarily on the parking brake pedal until you feel the pedal release. Slowly pull your foot up off the park brake pedal.
If the parking brake is not released when you begin to drive, the brake system warning light will be on and a chime will sound warning you that the parking brake is still on.
If you are towing a trailer and are parking on a hill, see Driving Characteristics and Towing Tips .
Antilock Brake System (ABS)
This vehicle has the Antilock Brake System (ABS), an advanced electronic braking system that helps prevent a braking skid. When the engine is started and the vehicle begins to drive away, ABS check ...Brake Assist
This vehicle has a brake assist feature designed to assist the driver in stopping or decreasing vehicle speed in emergency driving conditions. This feature uses the stability system hydraulic brak ...See also:
Entry Lighting
For vehicles with courtesy lamps, they come on and stay on for a set time whenever
is pressed on the Remote Keyless Entry
(RKE) transmitter.
If a door is opened, the lamps stay on while it is ope ...
SBZA Error Messages
The following messages may appear in the DIC:
SIDE BLIND ZONE ALERT SYSTEM OFF: This message indicates that the driver has
turned the system off.
SIDE BLIND ZONE SYSTEM UNAVAILABLE: This message in ...
Brake Pedal Travel
See your dealer if the brake pedal does not return to normal height, or if there
is a rapid increase in pedal travel. This could be a sign that brake service might
be required. ...