Mercedes-Benz GL-Class: Adjusting the multicontour seat
You can adjust the contour of the front seats individually so as to provide optimum support for your back and sides.
► Make sure that the SmartKey is in
position
2 in the ignition lock.
► Use switch 1 to move the thigh cushion
into the desired position.
► Press the
button to adjust the
contour of the backrest to suit your back.
► Press button 4 to move the point of
greatest backrest curvature downwards to
the lumbar region and press button 3 to
move it upwards to the upper back region.
► Use button 2 to adjust the side bolsters
for optimum lateral support.
EASY-ENTRY/EXIT feature (third rowof seats)
Important safety notes
WARNING
To help avoid personal injury, the second-row
seat backrests must be properly locked either
in the upright position or, when using the
expanded cargo vo ...
Adjusting the four-way lumbarsupport
You can adjust the contour of the driver's seat
backrests individually to provide optimum
support for your back.
1 To raise the backrest contour
2 To soften the backrest contour
3 To lower the ...
See also:
Warning Lights, Gauges, and Indicators
Warning lights and gauges can signal that something is wrong before it becomes
serious enough to cause an expensive repair or replacement. Paying attention to
the warning lights and gauges could p ...
Brake Fluid
The brake master cylinder reservoir is filled with DOT 3 brake fluid as indicated
on the reservoir cap.
See Engine Compartment Overview for the location of the reservoir.
There are ...
Operating the jack
1. Locate the jack under the recommended jacking point.
2. Attach the cranking lever to the jack using the adaptor. Fit the wheel nut
brace to the end of the cranking lever and rotate clockwise t ...
