Range Rover: ACC auto OFF
ACC will disengage, but not clear the memory when:
- • The CANCEL button is pressed.
- • The brake pedal is pressed.
- • Neutral (N) is selected.
- • Dynamic Stability Control (DSC) activates.
- • Electronic Traction Control (ETC) activates.
- • Hill Descent Control (HDC) is selected.
ACC will disengage, and clear the memory when:
- • The ignition system is switched off
- • Maximum vehicle speed is reached
- • A fault occurs in the ACC system.
Automatic low speed switch-OFF
If the speed of the vehicle decreases below 18 mph (30 km/h), the ACC system will be automatically switched off and the warning lamp will go out. If the brakes were being applied by the ACC system, ...Resuming the speed and follow mode
NOTICE RESUME should only be used if the driver is aware of the set speed and intends to return to it. By pressing the RESUME button after ACC has been cancelled (e.g. after braking), the A ...See also:
Important safety notes
WARNING
Gasoline and diesel fuels are highly flammable
and poisonous. They burn violently and can
cause serious injury.
Never allow sparks, flames or smoking
materials near gasoline o ...
Preprogrammed Playlists
Preprogrammed playlists created using WinAmp™, MusicMatch™, or Real Jukebox™
software can be accessed; however, they cannot be edited using the radio. These
playlists are treated as special ...
How to use SETTING button
The display as illustrated will appear when
the SETTING button is pushed.
For navigation settings, refer to the separate
Navigation System Owner’s Manual.
Audio settings
The display as i ...