Buick Enclave: Wheels and Tires - Electrical System - Vehicle Care - Buick Enclave Owner's ManualBuick Enclave: Wheels and Tires

Tires

Every new GM vehicle has high-quality tires made by a leading tire manufacturer.

See the warranty manual for information regarding the tire warranty and where to get service. For additional information refer to the tire manufacturer.

► Poorly maintained and improperly used tires are dangerous.WARNING
► Poorly maintained and improperly used tires are dangerous.
► Overloading the tires can cause overheating as a result of too much flexing.

There could be a blowout and a serious crash. See Vehicle Load Limits .

► Underinflated tires pose the same danger as overloaded tires. The resulting crash could cause serious injury.

Check all tires frequently to maintain the recommended pressure. Tire pressure should be checked when the tires are cold.

► Overinflated tires are more likely to be cut, punctured, or broken by a sudden impact — such as when hitting a pothole. Keep tires at the recommended pressure.

► Worn or old tires can cause a crash. If the tread is badly worn, replace them.
► Replace any tires that have been damaged by impacts with potholes, curbs, etc.

► Improperly repaired tires can cause a crash. Only the dealer or an authorized tire service center should repair, replace, dismount, and mount the tires.

► Do not spin the tires in excess of 55 km/h (35 mph) on slippery surfaces such as snow, mud, ice, etc.

Excessive spinning may cause the tires to explode.

    Instrument Panel Fuse Block
    The instrument panel fuse block is located under the instrument panel on the passenger side of the vehicle. Pull down on the cover to access the fuse block. Fuse Side The vehicle may not be equi ...

    Tire Sidewall Labeling
    Useful information about a tire is molded into its sidewall. The examples show a typical passenger vehicle tire and a compact spare tire sidewall.   Passenger (P-Metric) Tire Example (A) Ti ...

    See also:

    Automatic Door Locks
    Vehicles with an automatic lock/unlock feature enable you to program the vehicle's power door locks. This feature can be programmed through the Driver Information Center (DIC). See Vehicle Pe ...

    All softkey
    The All button shows a list of all POI categories. ...

    Switching on the ignition
    To turn on the ignition without starting the engine. Ensure the brake pedal is not depressed, and with a valid Smart Key present in the vehicle, press the START/STOP button and hold until the warn ...