Mercedes-Benz GL-Class: Vehicle - Settings menu - Menus and submenus - On-board computer and displays - Mercedes-Benz GL-Class Owner's ManualMercedes-Benz GL-Class: Vehicle

Activating/deactivating the automatic door locking feature

If you select the Automatic Door Locking function, the vehicle is centrally locked above a speed of around 9 mph (15 km/h).

locking feature, see. For further information on the automatic locking feature, see.

► Press the steering wheel to select the Settings button on the steering wheel to select the Settings menu.
► Press the selection of submenus. button to call up the selection of submenus.
► Press the Vehicle submenu.button to select the Vehicle submenu.
► Press the Automatic Door Locking. button to select Automatic Door Locking.
► Press the Automatic Door Locking on or off. button to switch Automatic Door Locking on or off.
► Press the button to, select a different display. button to select a different display.

Activating/deactivating the acoustic locking confirmation

If you activate the Acoustic Lock Feedback function, an audible signal sounds when the vehicle is locked or unlocked. When unlocking, the signal sounds once. When locking, it sounds three times.

► Press the steering wheel to select the Settings button on the steering wheel to select the Settings menu.
► Press the selection of submenus. button to call up the selection of submenus.
► Press the Vehicle submenu.button to select the Vehicle submenu.
► Press the Automatic Door Locking. button to select Automatic Door Locking.
► Press the Automatic Door Locking on or off. button to switch Automatic Door Locking on or off.
► Press the button to, select a different display. button to select a different display.

Activating/deactivating the radar sensor system

If the radar sensor system is switched off, Blind Spot Assist is deactivated.

by the FCC as a "Vehicular Radar System". USA only: This device has been approved by the FCC as a "Vehicular Radar System".

The radar sensor is intended for use in an automotive radar system only. Removal, tampering, or altering of the device will void any warranties, and is not permitted by the FCC. Do not tamper with, alter, or use in any nonapproved way.

Any unauthorized modification to this device could void the user's authority to operate the equipment.

Canada only:

This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation.

Any unauthorized modification to this device could void the user's authority to operate the equipment.

► Press the steering wheel to select the Settings button on the steering wheel to select the Settings menu.
► Press the ► Press the button to select submenus.
► Press the Vehicle submenu.button to select the Vehicle submenu.
► Press the Operator's Manual). button to select Radar Sensor (See Operator's Manual).
► Press the the Radar Sensor (see Operator's Manual). button to activate or deactivate the Radar Sensor (see Operator's Manual).
► Press the button to, select a different display. button to select a different display.

    Lights
    Switching the daytime running lamps on/off This function is not available in Canada. If you have activated the Daytime Running Lights function and the light switch is in the position, the dayti ...

    Convenience
    Activating/deactivating the EASYENTRY/ EXIT feature You can use the Easy-entry Function to activate or deactivate the EASY-ENTRY/EXIT feature. WARNING   You must make sure no one can b ...

    See also:

    Rear lamp removal
    To change any of the rear bulbs, it is necessary to completely remove the lamp unit from the vehicle. 1. With the tailgate open, remove the two screws from the inner edge of the unit. 2. Pull th ...

    Bluetooth®
    For vehicles with a Bluetooth system, it allows users with a Bluetooth-enabled cell phone to make and receive hands-free calls using the vehicle’s audio system and controls. The Bluetooth-enabled ...

    CD Player
    Playing a CD Insert a CD partway into the slot, label side up. The player pulls it in and the CD should begin playing. EJECT: Press and release to eject the disc that is currently playing. A be ...