Cadillac Escalade: Turning the System On and Off
Press this button, located next to the radio, to disable URPA.
The indicator light will come on and PARK ASSIST OFF displays on the Driver Information Center (DIC). See Object Detection System Messages .
How the System Works
URPA comes on automatically when the shift lever is moved into R (Reverse). A
single tone sounds to indicate the system is working.
URPA operates only at speeds less than 8 km/h (5 mph).
An obstacl ...
When the System Does Not Seem to Work Properly
The following messages may be displayed on the DIC:
SERVICE PARKING ASSIST: If this message occurs, take the vehicle to your dealer
for repair.
PARKING ASSIST OFF: This message occurs if the driver ...
See also:
Turn and Lane-Change Signals
An arrow on the instrument panel cluster flashes in the direction of the turn
or lane change.
Move the turn signal lever all the way up or down to signal a turn.
Raise or lower the lever until th ...
What to Use
Refer to Recommended Fluids and Lubricants to determine what kind
of lubricant to use. ...
Clearing the programmed information
Individual buttons cannot be cleared,
however to clear all programming, push
and hold the two outside buttons and
release when the indicator light begins to
flash (in approximately 20 seconds) ...
